External Electric Venetian Blinds



Exterior venetian blindsExternal venetian blind owns the characters of good anti-ultraviolet radiation and avoiding the direct sunlight shot. By tilting the slats, the light effects could be adjusted as well.

Many colors and types of the aluminum slats are available to match the building style and surrounding atmosphere. It could be installed with side track or cable guidance, the side track system is better to meet the outdoor using due to its stronger wind –resistance.

Manual, motorization, remote and intelligent control are options to choose, everyone could be monitored inside.

Exterior blinds product is better than the interior one as it have better function of energy saving and environmental protection. 97% sun radiation could be prevented out of the window glasses that leads to higher efficient to reduce the air-con energy cost.

Exterior venetian blind product is widely used in office building, factory, school, villa and etc constructions.
 
Key Features
  • Use Square motor driver,Normally installed in outdoor and collect lightings with adjust angle of blind
  • Blind can be able to up and down
  • Use steel wire or track protect blind from surfing when winding
  • Width of blind:50mm,80mm,100mm, Material:Aluminimum
  • Methods of control:Wireless control 、controlled together,intelligent control such as use wind,light,rain ect
System Description
 
Exterior window blinds,External Venetian Blinds

External specialty venetian blinds are the most effective shading device in as much as:
  • They can be retracted when not required
  • They can be lowered when sun comes onto the building elevation
  • The slats can be tilted between open and closed to cope with varying sun angles
  • The slats can be perforated to provide some outward vision, even when in the closed position
  • They provide effective control of both daylight/glare and solar gain
An external specialty venetian blind is similar to the ½” and 1” blinds that are commonly installed internally, with a number of key exceptions:
  • The slats are larger – generally being between 2” (50mm) and 4” (100mm)
  • The blinds are generally motorized for ease of raising / lowering and tilting
  • The main components (headrail, bottom rail and tilt mechanism) are more robust to cope with external weather conditions
  • The slats are held on side guide wires or extrusions so that the blinds are not too significantly affected by wind. That said, external venetian blinds are often used with a control system which will automatically raise the blinds if the wind speed exceeds a pre-set level

                   


Venetian blinds,Outdoor window blinds


Exterior blinds